The CLASSIC metal tile is profiled in steel with a thickness between 0.40 and 0.60 mm, zinc-coated (Z225-Z275), covered with a layer of glossy or dull type paint.
This type of metal roofing is the most widely used, similar to classical tiles and is used especially in residential buildings. The CLASSIC metal tile is produced in a wide range of colors.
Metal roofing panels are available in lengths between 500 mm and 7000 mm. For long waterline lengths, where covering with a single tile panel is not recommended, two or more metal roofing panels must be used. This provides the calculation of the bottom panels as a multiple of tiles, taking into account the technical overlap of 150 mm.
Technical characteristics
| Material | Steel sheet, galvanized on both sides, protected with polyester |
| Nominal thickness | 0,4 - 0,6 mm |
| Total width | 1200 mm |
| Effective coverage width | 1120 mm |
| Module length | 350 / 400 mm |
| Total height | 40 mm |
| Weight per area | 3 - 5 kg / sqm |
| Minimum slope | 8° if no diagonal joints are necessary/ 14 ° in the case of diagonal joints |
| Glossy finish warranty | 10-year warranty for color characteristics and corrosion |
| Matte finish warranty | 15-year warranty for color characteristics and corrosion |
| GrandeMat finish warranty | 30-year warranty for color characteristics and corrosion |
| Expected lifespan | 60 years for the roof, resistance to temperature changes |
Range of colors
Glossy finish
10-year warranty
Color and corrosion
Matte finish
15-year warranty
Color and corrosion
GrandeMat finish
30-year warranty
Color and corrosion
.
