The gutter system referred to as controlled discharge stormwater system from the roof or rainwater collection and drainage system, as the name implies, is designed to take water from the roof and direct it to the sewer system.
AXM gutter system is made of hot galvanized steel and protected on both sides with multilayers for a perfect behavior in time. The mix of elements is simple, fast and efficient, does not allow water to run off the facade or infiltration in the foundation and walls of the house, thus protecting the whole building ensuring a higher lifetime.
Raw Material
The production of AXM system elements is based on Swedish technology, since it uses the Swedish steel of the highest quality (0.6 mm), galvanized on both sides (275 g/sqm), and covered with polymer paint (2×35 microns). The coating layer confers products a special surface smoothness, high color stability, and solid resistance to rainwater and atmospheric pollutants.
The five layers that confer and protect the metal band confer resistance to corrosion of each element and provide an extended lifespan. This is why AXM system provides a long resistance guarantee over time and the only maintenance operation required is the cleaning of gutters.
Technical characteristics
| Parameter | Value for glossy finish | Value for matte finish | Standard |
|---|---|---|---|
| Use | Exterior | Exterior | - |
| Thickness of the surface | 35 µm/35 µm | 40 µm/40 µm | ISO 2808 |
| Surface thickness tolerance | 6 µm | 6 µm | EN 10 169-1 |
| Varnish | 40 | < 5 | EN 13523-2 |
| The minimum internal radius bend | 0.5 x t | 0.5 x t | EN 13523-7 |
| Minimum formation temperature | - 15 °C | - 15 °C | - |
| Scratch resistance | 35N | 30N | EN 13523-5 |
| Stain resistance | very good | very good | |
| Maximum working temperature | + 100 °C | + 100 °C | - |
| UV Category | RUV3 | RUV4 | prEN 10169-2 |
| Corrosion resistance category | RC5 | RC5 | prEN 10169-2 |
| Zinc coating | 275 g/sqm | 275 g/sqm | - |
